10 Greatest Backpacking Water Filters of 2023

What are the best water filter and water purification treatment systems used by backpackers? That really depends on the quality of the water you need to filter or purify, the number of people you need to treat water for, and your personal preferences. For example, squeeze-style water filters, UV purification, and filter bottles tend to be good for solo users and clear water sources, while chemical purification and pump filters/purifiers are good for larger groups and riskier or murkier water sources. Cost and filter longevity are also worth considering.

Here are the 10 best backpacking water filters and water purification systems we recommend for backpacking, hiking, and camping.

1. Sawyer Squeeze Water Filter

2. Platypus QuickDraw

3. Katadyn BeFree Water Filter

4. Aquamira Water Purifications Drops

5. Platypus Gravity Works

6. Katadyn Hiker Water Filter

7. Steripen Ultra UV Water Purifier

8. Grayl GeoPress Water Purifier Bottle

9. HydroBlu Versa Flow Water Filter

10. MSR Guardian Purifier

How to Choose a Backpacking Water Filter or Purifier

Many natural water sources contain microscopic organisms that can cause illness in humans. Most water filters intended for backcountry use will remove bacteria and protozoa, including giardia and cryptosporidium from these water sources. This is usually sufficient in the United States, Canada, and the UK. Viruses, often found in international water sources, are hard to remove because they are so small. Finer grained filters called purifiers are needed to remove them. They also can be neutralized with chemical purification agents such as chlorine dioxide or ultraviolet light.

There are a wide number of different water filter and purifier types available. Unfortunately, none of them are foolproof or perfectly suited for all kinds of trips and locales. They also differ in ease of use, the length of time it takes for them to process water, and whether they’re good for solo or group use. Here’s a brief summary of the different types and their strengths and weaknesses, with several examples to illustrate the available products in each category.

Squeeze Water Filters

Squeeze filters are single-stage filters that are good for removing bacteria and protozoa, but not viruses. They’re best used with clear water sources that are low in particulates and suspended organic matter to prevent clogging. Processing speed depends on the size of the “dirty” water bottle coupled with the filter and how much pressure the user exerts to push water through it. However, squeeze filters typically slow down with use and must be back-flushed with a cleaning syringe regularly to maintain their flow rate. Some examples:

Gravity and Inline Water Filters

Gravity water filters make it possible to process larger quantities of water at once using the power of gravity. A large water reservoir, called “the dirty bag” is hung from a tree with a hose leading to a water filter. The output of the filter flows out another hose to a clean reservoir, called the “clean bag.” A squeeze-style, single-stage filter is typically used. Gravity filters are good for couples and small groups. An inline water filter uses a similar setup, but the user sucks on the output hose rather than running it to a clean bag. Some examples:

Bottle and Straw Water Filters

Bottle and straw filters usually use the same single-stage, hollow fiber filters used by squeeze, gravity, and inline water filter systems. The user sucks water stored in a bottle or directly from the water source through the filter, rather than transferring it to secondary storage. They are best used by individuals in places where water is abundant. Some examples:

Pump Water Filters and Purifiers

Pump water filters filter out bacteria and protozoa, while pump water purifiers can also remove viruses. They have hand pumps that force water through the filter and out to secondary storage for future use. While pump filters do require some elbow grease to operate, they usually filter water quite quickly and are suitable for use by couples as well as individuals. Most have a pre-filter at the end of the hose that you drop into the water source to remove particulates and organic matter. This can be very handy when you can’t actually reach the water source, like down a steep embankment. They can also be cleaned and replacement filters are usually available. Some examples:

Chemical Water Purification

Chemical water purifiers are available in tablet or liquid form. The best chemical ingredient is chlorine dioxide, which has virtually no taste or color and kills bacteria, protozoa, and viruses. Chemical purification is best used by individuals rather than couples or groups because it takes anywhere from 15 minutes to 4 hours to fully purify water, far longer than other methods. While it is very lightweight, it is relatively expensive when compared to other methods. Many hikers carry chlorine dioxide as a backup to a second primary filter or purification method, as a result. Some examples:

Ultraviolet Light Water Purification

Ultraviolet Light is an effective form of water purification that neutralizes bacteria, protozoa, and viruses. It is best used with clear water since it doesn’t remove any particulates or organic matter. While UV purification is relatively fast, it’s not good for processing large quantities of water. It also depends on working batteries, which can run out of power. Still, it’s one of the few options that works well for cold water when there’s a risk of freezing a filter or purifier and ruining it.

Some examples:

Check Out All of SectionHiker’s Gear Guides!

SectionHiker is reader-supported. We independently research, test, and rate the best products. We only make money if you purchase a product through our affiliate links. Help us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides.