MORRFlate Duo: 2-Tire Inflation/Deflation Hose Kit: Quick & Easy Airing Up & Down
We all know the worst part about inflating & deflating our tires on the trail…. the wait.
At around 5-7 min per tire depending on PSI, that’s about 30 min. Now imagine it taking only 10-15 min. Thanks to the MORRFlate Duo, that wait time is cut in half to get you back on the road faster. Spend less time waiting, & more time exploring.
Find it Online
- MORRFlate Duo: 2-Tire Hose Kit
Features
The Duo Hose Kit comes in 2 configuration options: with or without the built in gauge. The built in gauge allows you to know your tires approximate PSI while you are inflating or deflating.
To know the exact pressure, just close the valve underneath the gauge by sliding the switch up. Slide down to switch to release valve again.
Stop struggling to get the hose connected to your tires valve stem. The air chuck has an easy locking mechanism. Slide the ring forward to lock the air chuck onto the valve stem. Slide the ring back to unlock and release the stem.
MORRFlate has different sized hose sets to fit your needs. The Duo comes in 13ft. and 24ft., and can inflate/deflate 1-2 tires at a time. The Quad can inflate up to 4 tires at a time, and comes in 2 lengths: up to 125″ wheelbase and up to 155″ wheelbase. Pulling a trailer? MORRFlate has you covered with their 6 tire modular trailer kit.
Simple, yet durable, MORRFlate hoses are kink and memory-free, meaning your lines will lay flat every time. The entire MORRFlate line will work “plug-n-play” with any air source that uses an “IM Coupler” to connect to. That means you can throw out your tiny single lines that came with your compressor, speed up your inflate & wait times.
How To Use
Once you’ve made sure the valve on your duo is closed, you must connect your lines to the stem valve in your tire.
To connect, make sure the air chuck is in the unlocked position by pulling back the ring. Place the air chuck on to the stem valve and push ring forward to lock onto the valve.
Once both air chucks are connected to a tire, on your gauge, press on. This will display your current PSI.
You can change units by pressing the unit button to the right until your preferred unit is reached.
If you are deflating your tires or just need to go down in pressure, simply open the valve. To open the valve, push the ring below the gauge upward.
NOTE: If inflating, keep valve closed until you have connected the Duo to your air compressor.
Final Thoughts
Since owning the MORRFlate Duo, I find myself choosing to air down far more than I did before. The Duo its easy to use and quick to set up. The fact that I can inflate 2 tires at once is the ultimate game changer.
While I no longer have time to crack a beer while waiting for each tire to inflate individually, I get to replace that time with more time on the trails, and less time squatting. IYKYK. Because of its fast set up, the question of “is it worth it” to inflate will always be yes, and your tires will thank you.
